
Sulphuric acid recycling
As producers and regulators become increasingly concerned about the ‘circular economy’, there is increasing focus on regenerating waste sulphuric acid for re-use.
As producers and regulators become increasingly concerned about the ‘circular economy’, there is increasing focus on regenerating waste sulphuric acid for re-use.
The possible failure of refractory in a Claus unit is a concern to both licensors and operators of Claus units. Bob Poteet of WIKA discusses a novel and easy way to monitor the shell temperature of the Claus thermal reactor using proven technology and highlights the benefits a purge-less thermocouple system for high temperature measurement.
TarT technology, one of 8 Rivers’ decarbonisation technologies, shows promise as an economical, efficient, sour gas sweetening process with near-zero carbon dioxide emissions, and may be key to unlocking access to the world’s sour gas reserves.
Comprimo and Ametek now offer the Analyser Air Control Technology (2ACT) Solution to the industry in which the information for the SRU air control is available 6-7 minutes earlier with the installation of an acid gas feed analyser-based feed forward control. This improvement to conventional SRU combustion air control systems enables operating companies to control their assets closer to design capacity at higher recovery efficiency and with fewer unscheduled outages.
Adani Enterprises says that its new greenfield copper smelter at Mundra in Gujarat, being developed by its subsidiary Kutch Copper Ltd, will begin operations in March 2024. The $1.1 billion project will have an annual production capacity of 1 million t/a of copper once the second phase is complete, but the March 24 start-up will be for the first, 500,000 t/a phase. The plant will also produce 25 t/a of gold, 250 t/a of silver, and 1.5 million t/a of sulphuric acid and 250,000 t/a of phosphoric acid as by-products. India currently imports roughly two million t/a of sulphuric acid since the closure of the Vedanta smelter in Tamil Nadu.
CRU’s Sulphur + Sulphuric Acid 2023 Conference and Exhibition takes place at the Sheraton New Orleans, Louisiana, USA, 6-8 November. Take part in this leading annual forum for the global sulphur and sulphuric acid community to learn, connect and do business. Hear from industry leaders and subject experts from around world and across the industry.
While phosphate fertilizer production represents the main slice of demand for elemental sulphur and sulphuric acid, sulphur fertilizers continue to be a growing sector of demand due to changes in the way that we use sulphur.
A new burner design for the combustion of natural gas with either combustion air or pure oxygen as the oxidiser has been developed by CS Combustion Solutions. The new Oxijet® -Burner has been designed to perform both start-up and main operation functions with one burner. The key objectives, challenges, and burner design considerations are discussed.
In this case study Johannes Derfler of AGRU Kunststofftechnik reports on how a new condenser design, engineered by OMV and INWA AG using PFA sheets from AGRU, was implemented at OMV refinery in Austria to address maintenance problems due to corrosion of the wet sulphuric acid (WSA) condensers and the follow-up units. As a result of the renovation, maintenance costs have been cut in half, while both maintenance intervals and overall operational safety has increased.
Following the completion of expansion work on the ultra-sour gas Shah field in May 2023, production has been ramped up. Occidental, which owns 40% of the Shah project and which operates the field in conjunction with ADONC Sour Gas, reported in July that it had achieved record output at Shah, with gross gas sales reaching 722 million scfd in Q2 2023 (equivalent to 1.1 billion scf/d of raw gas, which is 23% H2S and 10% CO 2 ). The expansion has taken processing capacity at Shah to 1.45 billion scf/d and forms part of the UAE’s plans to achieve gas self-sufficiency by the end of the decade. The expansion was conducted by Saipem, who were awarded a $510 million contract in 2021 to expand output from 1.3 billion scf/d to the current 1.45 billion scf/d. Work was completed two months ahead of schedule, according to Occidental.