Problem No. 7: Urea melt pump damage
The urea melt pump is a challenging application of a centrifugal type of pump. Urea polymer lumps falling in the melt pump suction line can cause cavitation of the pump and even damage the pump shaft.
Tag: Ureaknowhow
Problem No. 6: Choking of urea fluid bed granulator nozzles
The nozzles used in urea fluid bed granulation form the most essential part of a fluid bed granulation plant. This discussion looks at the problem of nozzle choking, the causes and solutions.
Problem No. 5: H₂SO₄ injection in urea melt
A discussion on the injection of sulphuric acid in the urea melt as a solution to reducing ammonia emissions from the urea prilling tower.
Problem No. 4: Gaseous ammonia and dust emissions in urea plants
A discussion on some of the different solutions being used in the urea industry to reduce ammonia and urea dust emissions.
Problem No. 3: Higher vibration in high pressure pipelines
In the high pressure synthesis section of a urea plant there are several high pressure pipelines prone to higher vibration. Special precautions are needed to reduce and control the vibrations in these lines and to ensure safe and reliable operation.
Problem No. 2: High biuret level at low plant loads
A discussion about the relationship between urea plant load and biuret content in the final product.
Problem No. 1: Foaming in purification and concentration section
A discussion about the possible causes of foaming in the purification and concentration section of a urea plant.